Description

The CMP Mercury is a quad composite cable cleat, designed and tested in accordance with IEC 61914. Manufactured from 316L Stainless Steel with Low Smoke & Fume, Zero Halogen (LSF0H), Phosphorus free polymeric liners to protect the cable sheath. The cleat is designed to accept four cables of the same size, for example three phase power cables plus a neutral cable. The cable cleat has been designed and tested for high short circuit fault withstand on cables held in quad formation, to ensure the securing and retention of cables without cable damage. The two M10 and one M12 fixing clearance holes in the base allows versatility of fixing the cleat to the mounting structure.

---

Features

• Third party certified to IEC 61914
• 316L Stainless Steel
• Quad formation
• Short circuit rating of 189kA
• Operating temperature -60°C to +60°C
• Combined single (M12) or two bolt (M10) base fixing

---

Technical Specification
Axial load test EC 61914 clause 9.4 Information on request Base Fixing Ø (D1) 2 x M10 Base Fixing Ø (D2) 1 x M12 Cable Ø range take (mm) 61-65 Depth (D) 55 Height (H) 179 Hole Pitch (P) 50 Lateral Load Test Figure IEC 61914 clause 9-3 Information on request Width (W) 143 Weight (g) 703

Certification

ETIM
Mounting Direct Corrosion resistant Yes Flame resistant Yes Ambient temperature during operating -60 Resistant to short circuit forces High voltage Approved according to IEC 61914 Yes Useful cross section 65 Number of mounting holes 2 Mounting holes M10 With protective insulation Yes UV resistant Yes Width 143 Height 179 Depth 55 Thickness 2